Vendor: Duncan Ceramics
Type: Duncan Cone 06 PB Pure Brilliance
Price: 11.25 - 95.00 (3 variants)

Brush-On Formula:

Mix clear glaze with palette knife.
Sponge Application: Dab a clean sponge into glaze and dab one coat over colors on surface of bisque to cover. After the sponged coat has dried thoroughly, load glaze brush with glaze and brush on two coats. Allow to dry between coats.
Brush Application: Load a glaze brush with glaze and apply two flowing coats. Let dry between coats.
Let ware dry thoroughly. Set ware securely on clean, sharp stilts in kiln. Fire to cone 06.

Vendor: Duncan Ceramics
Type: Duncan Cone 06 PB Pure Brilliance
Price: 40.50 - 95.00 (2 variants)

Dipping Glaze Formula:

Initially mix with electric mixer for no more than 2 minutes. A stainless steel wire whisk can be used to stir glaze periodically.
Submerge a TL 497 Viscosity Cup into tank and fill with glaze. As you lift cup from glaze, begin timing. Stop timing when stream of glaze begins to break. A range of 19-24 seconds is normal. Add small amounts of water as needed (4 oz. at a time).
Hold ware with hands or dipping tongs. If using hands, wear protective gloves. As you remove ware shake away any drips or runs. Do not finger sand the piece as this can cause airborne dust.
If necessary on larger piece, dip unglazed portion, slightly overlapping glazed area for full coverage. Let dry.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.

Vendor: Duncan Ceramics
Type: Duncan Cone 06-6 E-Z Stroke
Price: 4.65

Duncan E-Z Stroke® have a definite see-through quality, even when one color is applied over another. They should be used for design work, simulated china painting techniques, plaid effects or any other technique where a shaded or two-tone effect is desired. E-Z Strokes are also the preferred underglaze color medium for outlining and detailing, including eyes, personalizing with names and dates, and accenting design work.